บริษัท ไทยโพลิเมอร์ ซัพพลาย


ไทยโพลิเมอร์ ซัพพลาย จำกัด ผู้นำในด้านพลาสติกวิศวกรรม ผลิตชิ้นส่วนพลาสติก งานสั่งทำ ด้วยเครื่องจักรที่ทันสมัย และ ประสบการณ์ด้านสินค้าและบริการ มากกว่า 30 ปี





  • General Purpose
  • Olefin-Based
  • Fluoropolymer
  • High Performance
  • Static Controlled
  • Thermoset and Composite
  • โบร์ชัวร์ (Brochure)

General Purpose Engineering Plastics
ABS – Engineering Grade
  ABS has perhaps the best balance of properties when cost is a factor. It has good chemical
and stressresistance as well as a combination of
toughness, rigidity and creep resistance.
Acetal Copolymer and Delrin® Homopolymer
Acetal Copolymer   Acetal copolymer provides high strength and stiffness coupled with enhanced dimensional stability and ease of machining. As a semi-crystalline material, acetal is also characterized by a low coefficient of friction and good wear properties especially in wet environments.
Nylon   The exceptional bearing and wear properties of Nylon make it one of the most widely used
plastics in the world. Nylon exhibits high tensile
strength and modulus of elasticity as well as high impact resistance.
PVC – Type 1
PVC – Type 1   PVC is the most widely used member of the vinyl
family. PVC Sheets, Rods and Tubes offer excellent
corrosion and weather resistance. It has a high strength-to-weight ratio and is a good electrical and thermal insulator.
Delrin® AF Blend – 13% PTFE
Delrin   This blend is a unique thermoplastic material for use in moving parts in which low friction and long wear life are important. It is a combination of PTFE fibers uniformly dispersed in Delrin acetal resin.
Nylatron® GS Nylon
Nylatron   Nylatron GS is a molybdenumdisulphide (MoS2)
filled nylon offering improved strength and rigidity.
Nylatron GS is extruded and exhibits a high heat distortion temperature.
Ertalyte® PET-P
Ertalyte   Ertalyte® PET-P is unreinforced, semi-crystalline
thermoplastic polyester characterized as having the best dimensional stability. This is paired with excellent wear resistance, a low coefficient of friction, high strength, and resistance to moderately acidic solutions. Ertalyte® is capable of
sustaining high loads and enduring wear conditions.
Turcite® A (Blue)
turcite   Turcite is a high-quality, internally lubricated material that is ideal for applications with demanding wear and friction requirements. Its low water absorption enables components made with Turcite to retain their integrity over long periods. Turcite A is a resilient formulation that performs well under
vibratory and dynamic loading.
Polycarbonate – Machine Grade
Polycarbonate   Machine-grade polycarbonate is an amorphous thermoplastic material with high-impact strength, high modulus of elasticity and good dimensional stability.
Ertalyte® TX
Ertalyte® TX   Ertalyte TX is unreinforced semi-crystalline thermoplastic polyester (PET-P) that has a solid
lubricant filler. The material has excellent performance in both high-pressure and high-velocity conditions and is ideally suited for applications involving soft metal and plastic mating surfaces.
Turcite® X (Red)
turcite-red   Turcite is a high-quality, internally lubricated material that is ideal for applications with demanding wear and friction requirements. Its low water absorption enables components made with Turcite to retain


Olefin - Based Industrial Plastics
  HDPE (high-density polyethylene) offers excellent impact resistance, low moisture absorption,
high tensile strength and is light weight. HDPE is also non-toxic and non-staining.
Polypropylene   Polypropylene is noted for its excellent chemical resistance in corrosive environments. This polymer is easily welded and machined. Homopolymer and copolymer grades, as well as, a popular heat-stabilized formulation, are used in various applications throughout the chemical and semiconductor industries.
UHMW-PE   UHMW offers a combination of excellent properties
– outstanding abrasion resistance, superior impact
resistance, non-sticking and self-lubricating properties. UHMW reduces noise from impact and vibration.



Fluoropolymer Plastic Materials
Teflon® - PTFE Virgin Grade
Teflon   PTFE is a fluorocarbon-based polymer that
exhibits astonishing chemical resistance and ultra high-purity. PTFE has the lowest coefficient of
friction of any known material and is also self-lubricating.
Kel-F® - PCTFE
kel-f   PCTFE (PolyChloro TriFluoroEthylene) is a fluorocarbonbased polymer. PCTFE offers the unique combination of physical and mechanical properties, nonflammability, chemical resistance, near zero moisture absorption, and excellent electrical properties. These characteristics cannot be found in any other thermoplastic fluoropolymer with a useful
FEP   FEP is a relatively soft thermoplastic with lower tensile strength, wear resistance, and creep resistance than many other engineering plastics. FEP is chemically inert and has a low dielectric constant over a wide frequency range. FEP possesses a very high degree of stress crack resistance, a low coefficient of friction, exceptional dielectric properties and heat resistance.
Tefzel® - ETFE    
Tefzel   Tefzel ETFE provides both corrosion resistance
and mechanical strength over a wide temperature
range. The fluoroplastic family offers plastics with high chemical resistance, low and high temperature capability, resistance to weathering, low friction, electrical and thermal insulation.
Kynar® 740    
Kynar   Kynar 740 is an engineering thermoplastic that offers the stable characteristics of a fluoropolymer, as well as mechanical strength, abrasion resistance and high purity. PVDF can be used in the semiconductor, pulp and paper, and pharmaceutical industries, as well as
for nuclear waste, and
PFA   PFA (PerFluoro Alkoxy) offers similar properties
to FEP, but is considered more of a premium resin.
PFA is preferred when extended service is required in hostile environments. PFA offers high melt strength, stability at high processing temperatures, excellent crack and stress resistance and a low coefficient of friction.
Fluorosint® HPV    
Fluorosint-HPV   Fluorosint HPV is a high performance bearing grade of Fluorosint optimized for high PV and very low "K"
or wear factor. Fluorosint HPV was developed for bearing applications where other, low-tech PTFE formulations exhibit premature wear or simply cannot perform.
Fluorosint® 207    
Fluorosint207   Fluorosint 207's unmatched dimensional stability, excellent creep resistance and white color uniquely position 207 to serve FDA regulated applications. It is non-permeable in steam and complies with the FDA's regulation 21 CFR 175.300.
Halar® - ECTFE
  ECTFE (a copolymer of ethylene and chlorotrifluoro
ethylene) is a partially fluorinated semi-crystalline
polymer offering a unique combination of mechanical properties, thermal and chemical resistance with an outstanding ease of process ability. It is a very versatile polymer, available in all forms to meet
processing needs.
Fluorosint® MT-01
Fluorosint   Fluorosint MT-01 is an extreme grade of PTFE developed specifically for applications where the benefits of PTFE-based materials also require strength, stiffness and stability. Fluorosint MT-01 delivers high mechanical performance at elevated temperatures and as a result is often specified in seat, seal and wear applications where extreme
conditions are present.
Fluorosint® 500
Fluorosint   Fluorosint 500 has nine times greater resistance to
deformation under load than unfilled PTFE. Its coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/5 that of PTFE — often eliminating fit and clearance problems. It is 1/3 harder than PTFE, has better wear characteristics and maintains low frictional properties.



High Perfomance Advanced Engineering Materials
Torlon® 4301
  Torlon 4301exhibits excellent wear resistance in bearing grades and is able to endure harsh thermal,
chemical and stress conditions. The addition of PTFE and graphite provides higher wear resistance and lower coefficient of friction compared to the unfilled grade.
Celazole® PBI
Celazole   Celazole PBI is the highest performance engineering
thermoplastic available today. Celazole PBI has
better wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced engineering plastic.
Techtron® PPS
Techtron-PPS   Techtron PPS offers the broadest resistance to chemicals of any advanced engineering plastic. Minimal moisture absorption and a very low coefficient of linear thermal expansion, combined with stress-relieving manufacturing, make PPS ideally suited for precise tolerance machined components.
Vespel® Polyimide
SP-1, SP-21, SP-22, SP-211, SP-3
Vespel   Vespel offers a broad combination of temperature
resistance, chemical resistance, mechanical toughness, natural lubricity, wearresistance and insulation properties. Vespel SP-1 parts provide operating temperatures from cryogenic to 300°C (570°F), great plasma resistance, plus a UL rating for minimal electrical and thermal conductivity.
Torlon® 4203
Torlon-4203   Torlon 4203 PAI offers excellent compressive strength and the highest elongation of the Torlon grades. It also provides electrical insulation and exceptional impact strength. This Torlon grade is commonly used for IC Test Sockets and Handlers as well as electrical connectors and insulators.
Ultem® 1000 Polyetherimide
Ultem-1000   Ultem 1000 (standard, unfilled polyetherimide) offers excellent chemical resistance, high dielectric strength, natural flame resistance and extremely low smoke generation. Ultem’s exceptionally high mechanical properties and ease of fabrication, including bonding, make it an easy choice when exceptional performance is required.
Macor® Machinable Glass Ceramic
Macor   Unlike other ceramics, Macor can be machined with ordinary metalworking tools. Macor is also a problem solving material combining the performance of a technical ceramic with the versatility of a high performance plastic. Macor has no porosity and when properly baked out, will not outgas.
Torlon® 5530
Torlon-5530   Torlon 5530 is a 30% glassreinforced PAI. It is ideal for higher load structural or electronic applications. This grade is similar in composition to Torlon 5030 PAI. It is selected for larger shapes or when the greatest degree of dimensional control is required.
PEEK - Virgin Grade
PEEK - Virgin   PEEK grades offer chemical and water resistance similar to PPS (PolyPhenylene Sulfide), but can operate at higher temperatures continuously to 480°F (250°C). PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.
CeramaPEEK® NC30
CeramaPEEK   CeramaPEEK NC30 is an advanced ceramic-filled PEEK compound created to meet the requirements for tight tolerance, high frequency IC chip socket test fixtures. Unlike injection-molded competitors, this extruded material is available in large 24x48 void-free sheets.



Static Controlled Materials (ESd & Conductive)
Semitron® ESd 420 (ESd Ultem®)
  The only, truly dissipative plastic product for use in
high temperature applications. ESd 420 combines: static dissipation, low coefficient of expansion, high strength, heat resistance and is non-sloughing. This material has a tensile modulus of 550,000 psi, a heat
deflection temperature (at 264 psi) of 420°F.
Semitron® ESd 225 - Acetal
Celazole   Semitron ESd 225 is inherently dissipative and electrically stable unlike many other "dissipative"
plastic shapes. It does not rely on atmospheric phenomena to activate nor are surface treatments used to achieve dissipation. Static electricity is dissipated through ESd 225 as readily as it is dissipated along the surface.
Tivar® 1000 EC (Conductive)
  Tivar 1000 EC is a PE-UHMW grade containing specific additives rendering this material a lower surface resistivity than TIVAR 1000 ESD, improving
electrical conductivity and UV-resistance.
Semitron® ESd 410C - Conductive Ultem®
Vespel   Semitron ESd 410C (black) – Static Dissipative/ Conductive PEI (aka ESD Ultem). Having an excellent mechanical performance up to 210°C, Semitron ESd 410 also provides ESd solutions at higher temperatures.
Semitron® ESd 520HR - ESd PAI
Torlon-4203   Semitron ESd 520HR has electrostatic dissipation (ESd), high strength and heat resistance. This new ESd material is ideal for making nests, sockets and contactors for test equipment and other device handling components. The key feature of 520HR is its unique ability to resist dielectric breakdown at high voltages (>100V).
Tivar® 1000 ESD UHMW
Ultem-1000   Tivar 1000 ESd AntiStat UHMW is an ideal material to use when potentially volatile conditions exist, such as those in grain elevators and munitions plants, effectively safeguarding against static discharges.
CPVC-300™ ESd FM 4910 Sheet
Macor   CPVC-300 ESd FM 4910 is a plastic sheet product that controls static electricity in clean room applications requiring flame retardant clear plastic. This product has a static dissipative coating to prevent charge generation on the sheet surfaces.
PC-300 ESd Polycarbonate Sheet
Meldin-Polymide   A plastic sheet product that controls static electricity for many applications, including windows, doors, minienvironment glazing panels, and machine guards, covers and enclosures. PC-300 is a premium quality polycarbonate sheet coated with SciCron Technologies proprietary, clear, C-300™ static dissipative coating which prevents charge generation on the sheet surfaces.
AC-300™ ESd Acrylic Sheet
PEEK - Virgin   AC-300 Acrylic is a premium quality acrylic sheet product that controls static electricity in many applications, including windows, doors, machine covers and enclosures, and fabricated desiccators and cabinets. It is coated with SciCron Technologies' clear, C-300™ static dissipative coating which prevents charge generation on the sheet surfaces.
Pomalloy® ESd Acetal
CeramaPEEK   Pomalloy ESd is a static-dissipative acetal copolymer (POM SD). This non-carbon-filled, permanently static dissipative material is non-migratory and non-humidity dependent. With enhanced lubricity, Pomalloy ESd provides superior wear resistance and ease of machining.



Thermoset and Composite Materials
  G-10/FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass cloth material with an epoxy resin binder. This material is both chemical and moisture resistant and provides superior electrical properties.
Celazole   G-11 Glass Epoxy Laminate is produced in high temperature, laminated, glass-cloth sheets, as well as, precision-ground rods and rolled and molded tubes. G-11 exhibits high mechanical strength at temperatures up to 150°C and retains 50% of its flexural strength at elevated temperatures.
Phenolic - Grade X Paper
Techtron-PPS   X-Grade Paper Phenolic is manufactured from high strength paper bonded with a phenolic resin. The resulting material is a tough laminate with a high impact resistance, excellent tensile, compressive and flexural strengths.








สนใจสินค้า Engineering Plastics ติดต่อ

บริษัท ไทยโพลิเมอร์ ซัพพลาย จำกัด
33/54 หมู่ 10 ถนนเทพารักษ์ ต.บางปลา อ.บางพลี
จ.สมุทรปราการ 10540

โทร: 02-750-4852-8, 02-312-2021-5  
แฟกซ์: 02-312-1780 


เทอร์โมพลาสติก (Thermoplastic)


Polyethylene: PE เป็นพลาสติกที่นำมาใช้มากที่สุดใน อุตสาหกรรม เช่น ท่อน้ำ ถัง ถุง ขวด แท่นรองรับสินค้า


Polypropylene: PP ทนต่อสารไขมันและความร้อนสูง ใช้ทำแผ่น พลาสติถุงพลาสติกบรรจุอาหารที่ทนร้อน หลอดดูดพลาสติก เป็นต้น
Polystyrene: PS ใช้ทำชิ้นส่วนอุปกรณ์ไฟฟ้าและอิเล็กทรอนิกส์ เครื่องใช้สำนักงาน


SAN (styrene-acrylonitrile) เป็นพลาสติกโปร่งใสใช้ผลิตชิ้นส่วน เครื่องใช้ไฟฟ้า ชิ้นส่วนยานยนต์


ABS (acrylonitrile-butadiene-styrene) สมบัติคล้าย โพลิสไตรีนแต่ทนสารเคมีดีกว่า เหนียวกว่า โปร่งแสงใช้ผลิตถ้วย ถาด


Polyvinylchloride: PVC ใช้ทำขวดบรรจุน้ำมันและไขมันปรุงอาหาร ขวดบรรจุเครื่องดื่มที่มีแอลกอฮอล์ เช่น ไวน์ เบียร์ ใช้ทำแผ่นพลาสติก ห่อเนยแข็ง ทำแผ่นแลมิเนตชั้นในของถุงพลาสติก


ไนลอน (Nylon) เป็นพลาสติกที่มีความเหนียว ทำแผ่นแลมิเนตสำหรับ ทำถุงพลาสติกบรรจุอาหารแบบ สุญญากาศ


Polyethylene terephthalate: PET เหนียวมากโปร่งใส ราคาแพง ใช้ทำแผ่นฟิล์มบาง ๆ บรรจุอาหาร



เทอร์โมเซตติงพลาสติก (Thermosetting plastic)

เมลามีน ฟอร์มาลดีไฮด์ (melamine formaldehyde) เมลามีน ใช้ทำภาชนะบรรจุอาหารหลายชนิดเกิดคราบและรอยเปื้อนยาก


ฟีนอลฟอร์มาดีไฮต (phenol-formaldehyde)พลาสติกชนิดนี้ใช้ทำ ฝาจุกขวดและหม้อ


อีพ็อกซี (epoxy) ใช้เคลือบผิวของอุปกรณ์ภายในบ้านเรือน และท่อเก็บก๊าซ ใช้ในการเชื่อมส่วนประกอบโลหะ แก้วและเซรามิก ใช้ในการหล่ออุปกรณ์ที่ทำจากโลหะและเคลือบผิวอุปกรณ์ ใช้ใส่ในส่วนประกอบของอุปกรณ์ไฟฟ้า เส้นใยของท่อ และท่อความดัน ใช้เคลือบผิวของพื้นและผนัง ใช้เคลือบผิวถนน เพื่อกันลื่น ใช้ทำโฟมแข็ง ใช้เป็นสารในการทำสีของแก้ว เป็นต้น

โพลิเอสเตอร์ (polyester) เป็นโพลิเมอร์ที่นำมาใช้งานได้หลากหลาย เช่น ใช้ทำพลาสติกสำหรับเคลือบผิว ขวดน้ำ เส้นใย ฟิล์มและยาง เป็นต้น 
ยูรีเทน (urethane) ชื่อเรียกทั่วไปของเอทิลคาร์บาเมต มีสูตรทางเคมีคือ NH2COOC2H5


โพลิยูรีเทน (polyurethane) เหมาะสมใช้เป็นกาว และน้ำมันชักเงา พลาสติกและยาง ชื่อย่อคือ PU